SmallRig NP-FW50 Camera Battery and Charger Kit 3818
SmallRig NP-FW50 Camera Battery and Charger Kit 3818 includes two batteries and one charger. The battery, equipped with a full decoding chip, supports varied cameras perfectly without causing pop-up windows and has quality fireproof ABS and PC shell frosted to ensure fine touch and durability. It is the same size as the original battery, thus fitting seamlessly into the battery compartment. The dual battery charger can charge two batteries at the same time, with its LCD screen displaying real-time charging voltage, current, and charging capacity. It comes with a built-in USB-A charging cable and USB-C input interface, allowing it to be charged via a USB adapter, car charger, and power bank.
1. For the best charging experience, a power adapter with higher than 5V⎓2.1A output is recommended. Do not use the two input interfaces at the same time.
2. Manually measured weight and size may not be accurate.
3. The kit does not include a USB power adapter.
4. The charger comes with a meter to help display how much you charged (mAh). If the battery is temporarily disconnected, the meter will recalculate its charged capacity(mAh).
Sony Alpha 7/Alpha 7 II/Alpha 7R /Alpha 7R II/Alpha 7S/Alpha 7S II
Sony Alpha 3000 /Alpha 5000/Alpha 5100/Alpha 6000/Alpha 6100/Alpha 6300/Alpha 6400/Alpha 6500
Sony Cyber-shot DSC-RX10 /DSC-RX10M2/DSC-RX10M3/DSC-RX10M4...
*There are too many compatible models to be listed. Please refer to their battery type.
2 × NP-FW50 Camera Battery
2 × Battery Protective Cover
1 × Dual Battery Charger (Built-in USB-A Cable)
1 × User Manual
Battery Type: Lithium-ion Battery
Battery Parameter: 1030mAh 7.4V 7.62Wh
Battery Charging Limited Voltage: 8.4V
Charger Input: USB-C: 5V⎓2.1A (Min), USB-A: 5V⎓2.1A (Min)
Charger Output: 8.4V⎓1000mA (Single) 8.4V⎓1000mA (Dual)
Operating Environment Temperature：0°C~40°C
Single Battery Dimensions: 45.2×31.8×18.5mm
Charger Dimensions: 90×56×27mm
Package Dimensions: 163×115×36mm
Single Battery: 45g
Package Weight: 219g