SonyCanonNikonPanasonicZ CAMSIGMABlackmagic DesignGo ProFUJIFILMDJIInsta 360REDAtomosSmallHDFeelworldFreefly WaveOlympusAirTagUniversalLeicaRicohHasselbladPhone CagePhone HolderPhone Side HandlePhone Sun HoodPhone Shoe Mount & AdaptorPhone Cage SetPhone Lens Backplate & FilterWireless Video MonitorPhone StrapTop HandleSide HandleHandle AccessoriesMounting BracketCable & Cable ClampNATO Rail & ClampCold Shoe & Rosette Mount & AdapterScrew & DriverSun HoodTeleprompterFilterCard CaseCleaning Wipe & KitBag & Cloth & Shoulder StrapProtectorWireless Remote ControlSuckerSSD & SSD HolderReflectorDesk MountCooling SystemDocking Station & Card ReaderPhotography TurntableSpecial Gift SetSlider Support KitNeck SupportBrand Peripheral ProductViewfinder EyecupCamera CartOptical ViewfinderCycling Camera MountVehicle Shooting Curtain SetWireless Video RepeaterStrap MountShock Absorber ArmLanding Pad & GearShoulder HandleShoulder PadShoulder Rosette ArmRodRod ClampShoulder Rig KitCounter WeightStabilizer HandgripStabilizer PlateStabilizer ClampStabilizer MountHandheld RingShoulder Strap & Other AccessoriesMatte BoxMatte Box FlagClamp-On RingRod SupportFilter & Filter TrayFollow FocusFocus Gear RingFocus Rod ClampFocus GearLED LightCOB LightSoftboxLight StandLight AccessoriesQuick Release PlateBase PlateTop PlateDovetail PlateUniversal PlateBatteryDummy BatteryBattery ChargerBattery PlateCharging CableOn-Camera MicrophoneLavalier MicrophoneUSB MicrophoneMicrophone SupportPhoto TripodVideo TripodPhone TripodTripod HeadTripod AccessoriesMonopod

SmallRig Cage Kit for Panasonic LUMIX SHX1 6664

SmallRig Cage Kit for Panasonic LUMIX SHX1 6664

1. All-Metal Protective Cage: Designed for Panasonic LUMIX SHX1, providing form-fitting protection while maintaining operating clearance and compatibility with the original XLR audio handle and control handle.

2. Multiple Mounting Options: Features cold shoe mounts, ARRI locating holes, “HawkLock” NATO rails, 15mm rod clamp holes, cable clamp holes, and multiple 1/4"-20 and 3/8"-16 threaded holes for flexible accessory mounting.

3. Horizontal and Vertical Shooting Support: The modular four-panel design allows easy reconfiguration for both horizontal and vertical shooting while maintaining compatibility with key accessories.

4. Dedicated Timecode Mount Plate: Includes a timecode mount plate (ID 7348) and a pre-installed hook-and-loop panel for secure attachment of a timecode device or other small accessories while helping keep the rig clean and organized.

5. XLR Handle Extension: Extends the rear by 25.0mm (1.0in) and features built-in NATO rails and cold shoe mounts for quick attachment of a monitor, iPad, phone, or other devices. The XLR top plate includes built-in padding for added protection and a finger-contoured design for improved grip comfort.

$399.99  
Sku 6664
EAN 6941590034782

Availability: In stock 34

This product has been viewed 47 times

Product Description

 

SmallRig Cage Kit for Panasonic LUMIX SHX1 6664

SmallRig Cage Kit for Panasonic LUMIX SHX1 6664 is a professional camera cage designed for Panasonic LUMIX SHX1 to support advanced filmmaking setups while providing reliable protection and flexible expansion.

The cage features a form-fitting design with built-in scratch-resistant padding on the top and bottom to help protect the camera body. Carefully reserved clearance on both sides maintains operating space and accessibility during use. When using the original control handle, the rotatable adapter (ID 7341) is required. With this module installed, the cage remains compatible with both the original XLR audio handle and the original control handle.

Its split-panel structure is secured with screws for a stable fit and reduced movement. The modular four-panel design supports accessory mounting in both horizontal and vertical shooting setups, making it easy to adapt the setup for different production needs. The top and side plates feature integrated NATO rails, XLR handle mounting positions, cold shoe mounts, and rod clamp holes for accessories such as the original XLR handle, monitor supports (ID MD3507, 2906B), the 15mm single rod clamp (ID 3598B), and the phone support (ID 4382).

The side plate is designed not to obstruct the camera’s heat dissipation vent and includes ARRI locating holes, NATO rails, and 1/4"-20 and 3/8"-16 threaded holes. It supports accessories such as the original control handle used with the rotatable adapter (ID 7341) and the timecode mount plate (ID 7348). In vertical shooting mode, it also supports mounting the original XLR handle.

Around the lens center on the bottom, built-in 1/4"-20 and 3/8"-16 threaded holes support accessories such as 19mm and 15mm dual rod clamps (ID 5366), tripods (ID 3751P), shoulder rigs (ID 5199), and gimbals. In vertical shooting mode, the cage also supports accessories such as a monitor support, timecode mount plate (ID 7348), and the rotatable adapter for the original control handle (ID 7341). Cable routing holes and cable clamps help keep cables organized and reduce the need for full reassembly when switching between horizontal and vertical shooting.

This kit includes a dedicated timecode mount plate (ID 7348) that installs with locating 1/4"-20 screws and comes with a pre-installed hook-and-loop panel. It provides a secure mounting solution for a timecode device or other compact accessories, helping keep the camera rig clean and organized while reducing the need to reposition accessories when switching between horizontal and vertical shooting. It is compatible with small devices measuring up to 50.0 × 38.0 × 15.0mm (2.0 × 1.5 × 0.6in) and includes replaceable hook-and-loop pads for added flexibility.

The kit also includes an XLR handle extension rig that extends the rear by 25.0mm (1.0in). Built-in NATO rails and cold shoe mounts make it easy to attach accessories such as a monitor, iPad, or phone. The XLR top plate includes built-in padding for added protection and is designed to avoid interfering with the control dial, hot shoe, microphone operation, or screen flip-out. A dual-point locking design helps keep the rig secure with minimal play, while the finger-contoured shape offers a more comfortable and stable grip for easier monitoring.

Note:

1. When using the original control handle, the rotatable adapter (ID 7341) is required.

2. Recommended device size for the timecode mount plate: ≤ 50.0 × 38.0 × 15.0mm (≤ 2.0 × 1.5 × 0.6in).

Work With

Compatible with Panasonic LUMIX SHX1.

Packing List

Top Plate × 1

Left Side Plate × 1

Right Side Plate × 1

Base Plate × 1

NATO Rail × 1

Lens Adapter Support × 1

Adhesive Mounting Plate × 1

Strap × 2

Hook-and-Loop Set × 10

Wrench × 1

15mm Rod Clamp × 1

Cage (for XLR Module) × 1

Quick Release Mount Plate (for XLR Module) × 1

Extension Handle (for XLR Module) × 1

NATO Rail (for XLR Module) × 1

Timecode Mounting Plate × 1

Technical Data

Product Dimensions: 165.0 × 235.0 × 241.0mm / 6.5 × 9.3 × 9.5in

Package Dimensions: 320.0 × 183.5 × 75.0mm / 12.6 × 7.2 × 3.0in

Product Weight: 649.0 ± 5.0g / 22.9 ± 0.2oz

Package Weight: 997.0 ± 10.0g / 35.2 ± 0.4oz

Material(s): Aluminum Alloy, Silicone